CompletedPool deck with herringbone inlays & LED lighting
A bare concrete patio under a covered porch turned into a composite pool deck with picture-frame borders, herringbone inlays and LED lighting.
A1Decks & outdoor living
Deck Builder in Fredericton, NB
Multi-level decks, pool surrounds and patios, planned in 3D before the first post hole — so you see the framing, the stairs and the finished surface before you commit.
Decks in New Brunswick have to deal with frost, snow load and freeze-thaw cycles. That makes the parts you never look at — footings, beams, joist spacing, ledger connections — the parts that decide how long the deck lasts.
For larger projects we model the deck in SketchUp: the framing plan for each level, then the finished surface with real board and railing choices. You can review the layout, the stair positions and the details before anything is ordered.
Ask us about permit planning. We prepare the drawings and information the City of Fredericton and surrounding municipalities usually ask for, and arrange utility locates before any digging.
A2Related projects
Our decks & outdoor living work
Completed
CompletedUpper deck rebuild with waterproof membrane
A second-storey wood deck above a covered patio taken down to the frame, waterproofed and rebuilt in composite.
CompletedBackyard sauna under the covered patio
A cedar sauna assembled in an empty corner of the covered patio, with lighting and electrical supply installed.
CompletedPool coping and paver repair
Loose and broken coping stones and pavers around a pool lifted, re-bedded and re-set level.
CompletedBlack metal fence and gate
A black aluminium fence and gate set straight and level on new posts.
Work in progressThree-level composite deck: from 3D design to build
A tired multi-level wood deck being replaced with a three-level composite deck planned level by level in 3D — the first level is finished, the others are under way.
CompletedFront porch stairs with LED step lighting
Rotten front entry stairs rebuilt with new stringers, wide treads, enclosed sides, a black metal handrail and LED lighting under every step.
Work in progressShed: from 3D rendering to build
A gable-roof shed shown to the client as a rendering first, now being framed, sheathed, wrapped and shingled.
A4Questions
Decks & outdoor living: common questions
Do I need a permit for a deck in Fredericton?
Often, yes — particularly for raised decks and decks attached to the house. Requirements depend on height, size and location, so we check them for your project and help you prepare the application.
Composite or wood?
Composite costs more up front but needs far less maintenance and does not need staining. Pressure-treated wood is the budget option. We show both in your 3D plan so you can compare.
When should I book a spring deck?
Winter is the best time to plan. Design, drawings and permits take time, so starting early means you are ready to build when the ground allows.
A9Next step
Planning decks & outdoor living?
Send a short description and a few photos. We’ll contact you to talk it through and, if it makes sense, arrange a visit.